Watch a Demo Video.....

Product Description

Artist TweedTone20R 20 Watt Tube Guitar Amplifier Combo

The Artist Tweedtone20R amplifier provides a great vintage-voiced tone at an affordable price. The amp has 2 channels, clean and overdrive. As is typical of vintage amps the 20R has a footswitch jack on the back that allows you to switch between clean and dirty channels seamlessly. The footswitch is available at a small additional cost.

Each channel has an independent volume control, and the amp features a master volume across both channels. This adds clean headroom, and also means that you can really drive the Clean channel hard to get that nice warm breakup at levels that don't have to necessarily annoy your neighbours. Switching to the overdrive channel provides a thick, creamy overdrive that naturally lends itself to a subtle variety of harmonically rich blues and rock tones, and the extra gain on the Drive channel means you can keep the Master volume low and still get classic tube-distortion.

Playing around with different Master and Channel volumes will provide a vast array of vintage tones, and there is some serious volume on tap with 20W of tube power!

The 3-band EQ is highly responsive and allows for a vast array of tones to suit your personal preferences.

This amp is loaded with a high-performance Celestion Seventy-80 12 inch speaker for excellent all-around performance.

The Tech Features

Model: Tweedtone20R

Brand: Artist

Output Power: 20W(RMS)

Speaker: 1 x 12 inch, Celestion 70/80 Speaker

Speaker OHM: 8 ohm

Tubes:

  • 2 x EL84 Power Tubes
  • 3 x 12AX7 Preamp Tubes

Control Panel:

  • INPUT - Connection to the instrument.
  • CLEAN VOLUME - Sets the volume of the Clean channel.
  • DRIVE BUTTON - Manually switch between the Clean and Drive channels.
  • DRIVE GAIN - Sets the amount of gain or distortion in the overdrive channel.
  • DRIVE VOLUME - Sets the volume of the Drive channel.
  • TREBLE - Adjusts the high-frequency equalization range as required.
  • MIDDLE - Gives active midrange equalization with boost & cut.
  • BASS - Adjusts the low-frequency equalization range as required.
  • MASTER VOLUME - Adjusts the overall volume of either the Clean. or Drive channels.
  • MASTER REVERB - Adjusts the amount of reverb added to the normal signal.
  • FOOTSWITCH INPUT - On the back of the amp. This switches the Clean and Drive channel. A footswitch is not included. (Please note, the drive button needs to be pressed in for this to work)
  • STANDBY SWITCH - Switches the amp in/out of standby power mode. Wait until 30 seconds after the power switch is turned on to prolong your tube life.
  • POWER SWITCH - Main amplifier ON & OFF.

Dimensions: in MM 495W x 445H x 255D in Inch's 19.5W x 17.5H x 10D

Weight: 18.5Kg / 41 lbs

Optional Accessories: Belcat FST22 Latching Footswitch

Power Consumption: 85W

Power Plug: (See our blog post for more details)

  • AU & NZ: 240V with AU/NZ Plug
  • UK: 230V with a UK plug (with a 13a fuse in the plug)
  • USA: 120V with a USA 3 pin plug

 

 


(14945)

Reviews